For Consumers

For Professionals

About the BMA

Contact the BMA

Home

For Professionals
BRASSWARE Standards

Brassware - The generic name for all types of taps and mixers.

BSI British Standards
BSI British Standards' publications give recommendations on a wide range of building and construction matters including materials, testing, health and safety, access and regulations. They are essential reference for architects, developers, building owners, site managers, building contractors, structural engineers, materials specifiers and other interested parties. www.bsigroup.com

British Standards Institution
Always check for the most up-to-date version of the standard

BS1010- 2
Specification for draw-off taps and stopvalves for water services (screw-down pattern). Draw-off taps and above ground stopvalves. 

BS5412
Specification for low-resistance single taps and combination tap assemblies (nominal size 1/2 and
3/4) suitable for operation at PN 10 max, and a minimum flow pressure of 0.01 MPa (0.1bar)

BS 5388
Specification for spray taps

BS 5779
Specification for spray mixing taps

BS 6700
Specification for design, installation, testing and maintenance of services supplying water for
domestic use within buildings and their curtilages. 

BS 7942
Thermostatic mixing valves for use in care establishments .Requirements and test methods.

BS EN ISO 1456 
Metallic and other inorganic coatings. Electroplated coatings of nickel, nickel plus chromium. Copper plus nickel plus chromium.

BS EN 200
Sanitary tapware. General technical specifications for single taps and combination taps for water supply systems of type 1 and type 2.

BS EN 246
Sanitary tapware. General technical specifications for flow rate regulators.

BS EN 248
Sanitary tapware. General specifications for electrodeposited coatings of Ni-Cr.

BS EN 816
Sanitary tapware. Automatic shut off valves PN10.

BS EN 817
Sanitary tapware. Mechanical mixing valves PN10. General technical specifications.

BS EN1111
Sanitary tapware. Thermostatic mixing valves (PN 10) General technical specifications.

BS EN 1112
Sanitary tapware. Shower outlets. Shower outlets for sanitary tapware for water supply systems type 1 and type 2. General technical specification.

BS EN 1113
Sanitary tapware. Shower hoses for sanitary tapware for water supply systems type 1 and type 2. General technical specification.

BS EN 1287
Sanitary tapware. Low pressure thermostatic mixing valves. General technical specification.

BS EN 15091
Sanitary tapware. Electronic opening and closing sanitary tapware.

Water (Water Fittings) Regulations 1999
The Water Fittings Regulations (or Byelaws 2000 in Scotland) are national requirements for the
design, installation and maintenance of plumbing systems, water fittings and water-using appliances.
Their purpose is to prevent misuse, waste, undue consumption or erroneous measurement of water
and to prevent contamination of drinking water.

 

For Consumers
Bathroom Products
WCs & Cisterns
Washbasins
Bidets
Brassware & TMVs
Showering
Wet Rooms

Grab Rails & Accessories


Special Products
Hoists & Trolleys
Seats
Special Baths
Body Dryers
Bathroom Design
Basics
Lighting

For Professionals
Regulations and Standards
Building Regulations Approved Doc M
Disability Discrimination Act
BS8300
Sanitaryware
Brassware
Hot Water Safety -
TMVs
Baths


Shower Controls
Shower Enclosures
Shower Trays
Bathroom Furniture
Domestic Water Systems

Products for washrooms
in public buildings

Sanitaryware
Brassware & TMVs
Showering & Wet Rooms
Grab Rails & Accessories
Hoists
Special Baths

Safety & Security
Links




Privacy Statement
  |  Site Map  |  Copyright 2012 Bathroom Manufacturers Association